Pressure Washing Prices in Altoona, Pennsylvania ()
Pressure washing prices in Altoona, Pennsylvania range from $60 to $1,600 depending on the task. The size of your deck, driveway, patio, or house will increase or decrease your cost. To get a more accurate cost for your pressure washing project, request a quote. Please note that if you use our matching service, we may be compensated.
Topics Covered in this Guide: Pressure Washing Prices | Pressure Washing Prices Factors | Frequently Asked Questions | Related Cost Guides | Pressure Washing Prices in Your Area
Pressure Washing Services Near You
Find local pressure washing services in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Free Cost Estimates
Cost of Pressure Washing in Altoona, PA?
Pressure washing prices in Altoona, Pennsylvania range from $60 to $1,600 depending on the task. The size of your deck, driveway, patio, or house will increase or decrease your cost. Note that there is a difference between pressure washing (pressure cleaning) and power washing (power cleaning). Pressure washing uses unheated water and power washing uses heated water. Since power washing requires heated water, it can cost 10-15% more than the prices quoted in this guide, so keep that in mind.
This guide is intended to provide you an approximate pressure washing prices in Altoona, PA. To get a more accurate quote for your specific project, request a free estimate. Our research, although general in nature, does include feedback provided by pressure washing services and research conducted by the HomeBlue staff.
Cost to Pressure Wash a House in Altoona
- The average cost to pressure wash a house in Altoona, Pennsylvania is approximately $500 (the cost ranges from $400 to $600 for a 1,500 to 2,000 square foot house). Consult with a contractor to get a price for your upcoming project.
Cost to pressure wash a house in Altoona based on size:
- 1,500 to 2,000 sf house: $400 to $600
- 2,000 to 3,000 sf house: $600 to $1,000
- 3,000 to 4,000 sf house: $700 to $1,300
- 4,000 to 5,000 sf house: $900 to $1,600
Cost to Pressure Wash a Deck or Patio in Altoona
- The average cost to pressure wash a deck or patio in Altoona, Pennsylvania is approximately $80 (the cost ranges from $60 to $100 for a 200 square foot deck or patio).
Cost to pressure wash a deck or patio in Altoona based on size:
- 10 x 20 foot deck (200-sf): $60 to $100
- 20 x 30 foot deck (600-sf): $190 to $300
- 20 x 40 foot deck (800-sf): $260 to $400
- 20 x 50 foot deck (1,000-sf): $320 to $510
Cost to Pressure Wash a Driveway in Altoona
- The average cost to pressure wash a driveway in Altoona, Pennsylvania is approximately $200 (the cost ranges from $150 to $260 for an 40 x 20 foot driveway).
Price to pressure wash a driveway in Altoona based on size:
- 40 x 20 foot driveway (800-sf): $150 to $260
- 60 x 20 foot driveway (1,200-sf): $220 to $390
- 80 x 20 foot driveway (1,600-sf): $290 to $510
- 100 x 20 foot driveway (2,000-sf): $370 to $640
Free Quotes from Power Washing Services
Find power washing services in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Click to Get Quotes
Factors that Influence Pressure Washing Prices in Altoona
When power washing companies come to provide you an estimate, they will consider a number of factors that can increase or decrease the cost of your project. Pricing for your pressure washing project will vary based on the size of your hourse, deck, patio, or driveway. For instance, the height and square footage of your home will impact the price. Here are a few things to keep in mind when you get quotes from pressure washing businesses:
Your prices may be higher when:
- The house or building is two or more stories.
- The house, deck or patio is difficult to access.
- Water access is limited.
- A heated water process is used.
- Landscaping and trees infringe the work area.
- There is significant dirt, mold, and mildew on the surface.
- Workers need to move furniture from the surface.
- The project is located in a high cost of living city.
- The address of the property is in a difficult to reach location.
Your prices may be lower when:
- The house is one story.
- The house, deck or patio is easy to access.
- Water is readily available.
- A cold water process is used.
- There is no landscaping and trees in the work area.
- The surface has limited dirt, mold, and mildew.
- Workers do not need to move any furniture.
- The project is located in a low or average cost of living city.
- The address of the property is in an easy to reach location.
Pressure Washing Cost Estimates
Find power washing companies in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Get Cost Estimates
Pressure Washing FAQs
Here are a few frequently asked questions related to pressure washing:
Yes, pressure washing relies on high-pressure cold water to clean surfaces whereas power washing relies on high-pressure hot water or steam. A cold water process (pressure washing) is good for general cleaning such as removing dirt, grime, mold, mildew and dust. A hot water or steam process (power washing) is good for removing grease, oil, and stubborn stains. You should be able to find a contractor in Altoona for either of these processes. To be fair, the terms pressure washing and power washing are often used interchangeably. It might be easier to ask specifically for a cold water or hot water process. Typically, a hot water process will cost a bit more because it requires a machine capable of heating the water.
It is unlikely that a permit is required for residential projects that are routine and small scale. However, there may be some situations that might require a permit. For instance, projects involving large structures, structures over a certain height, public spaces, or historical properties may require a permit. Also, there may be some environmental or wastewater disposal regulations that could impact some pressure washing projects. We suggest you talk to the contractor you hire in Altoona to determine whether a permit is required for your project.
The temperature depends on factors such as the ambient temperature and the type of material being pressure washed. For instance, pressure washing temperatures for concrete differ from temperatures for fabric. Lower end temperatures often range from 150°F to 200°F, while hotter temperatures are sometimes used for more difficult projects. Some machines can heat water to over 300°F. It is best to ask the contractor you hire in Altoona to determine the appropriate temperature for your specific project.
Related Cost Guides
We have researched several other closely related projects. If one of these projects better represents the type of project you are undertaking, please check out the appropriate guide:
- Carpet cleaning cost. Carpet Cleaning Cost Guide for Altoona
- Gutter cleaning cost. Gutter Cleaning Cost Guide for Altoona
- Air duct cleaning cost. Air Duct Cleaning Cost Guide for Altoona
- Window cleaning cost. Window Cleaning Cost Guide for Altoona
Get Pressure Washing Quotes
Find power washing companies in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Free Cost Estimates
Pressure Washing Prices in Your Area
Cost to power wash house varies from area to area. We have developed a number of pressure washing prices guides to help you identify the cost to pressure wash house near you.
- How to Get Pressure Washing Price Quotes
- How to Get Matched to Pressure Washing Services
- Search for Pressure Washing Prices in Your City
- Pressure Washing Prices Guide (National Averages)
- Pressure Washing Prices in Amarillo, TX