Paver Driveway Cost in Oakland, California

Paver driveway cost in Oakland, California ranges from $17 to $21 per square foot for sand based concrete pavers (not including demolition of existing driveway). Brick driveway cost (sand based) ranges from $18 to $23 per square foot depending on the quality of brick. To get a more accurate cost for your paver driveway project, request a quote.

By HomeBlue Team

June 05, 2022 09:58 AM

Paver Companies Near You

Find local paver companies in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Free Cost Estimates

How Much Does a Paver Driveway Cost in Oakland, CA?

This guide is intended to provide you an approximate paver driveway cost in your area. To get a quote for your specific project, Click Here for a Free Estimate. Our research, which includes feedback provided by paver companies, resulted in the following paver and brick driveway cost in Oakland, CA.

Paver driveway cost (per square foot, sand based concrete pavers):

Paver driveway cost in Oakland, California ranges from $17 to $21 per square foot for sand based concrete pavers (not including demolition of existing driveway). This includes installing a 4-inch compacted aggregate base and a 1-inch sand bedding layer. If you want a concrete slab base, increase the square foot prices above by about $4 (on the lower end) to $8 (on the upper end). If an existing driveway needs to be removed, see paver demolition costs.

Paver driveway cost (per square foot, sand based concrete pavers) based on the size of your driveway:

Paver driveway cost (12 ft x 30 ft, sand based concrete pavers): $6,100 to $7,400.
Paver driveway cost (12 ft x 40 ft, sand based concrete pavers): $8,200 to $9,900.
Paver driveway cost (12 ft x 50 ft, sand based concrete pavers): $10,200 to $12,400.
Paver driveway cost (12 ft x 60 ft, sand based concrete pavers): $12,300 to $14,900.
Paver driveway cost (24 ft x 30 ft, sand based concrete pavers): $12,300 to $14,900.
Paver driveway cost (24 ft x 40 ft, sand based concrete pavers): $16,300 to $19,800.
Paver driveway cost (24 ft x 50 ft, sand based concrete pavers): $20,400 to $24,800.
Paver driveway cost (24 ft x 60 ft, sand based concrete pavers): $24,500 to $29,800.
Note: One car driveways typically vary in width from 9 to 12 feet. Two car driveways typically vary in width from 18 to 24 feet. Above, we used the larger widths in our calculations.

Brick driveway cost (per square foot):

Standard brick driveway cost (sand based) ranges from $18 to $22 per square foot (not including demolition of existing driveway). This includes installing a 4-inch compacted stone aggregate base and a 1-inch sand bedding layer. If you prefer a concrete slab base, increase the prices above by $4 (on the lower end) to $8 (on the upper end).
Deluxe brick driveway cost (sand based) ranges from $21 to $23 per square foot (not including demolition of existing driveway). This includes installing a 4-inch compacted stone aggregate base and a 1-inch sand bedding layer. If you prefer a concrete slab base, increase the prices above by $4 (on the lower end) to $8 (on the upper end).

Adobe paver driveway cost (per square foot):

Sand based adobe paver driveway cost ranges from $15 to $18 per square foot (not including demolition of existing driveway). This includes installing a 4-inch compacted stone aggregate base and a 1-inch sand bedding layer. Installing a concrete slab base, increase these prices above by around $4 (on the lower end) to $8 (on the upper end).

Paver demolition cost:

Sand based paver demolition cost ranges from $5 to $6 per square foot.
Mortar based paver demolition cost ranges from $9 to $10 per square foot.

Alternative methods to consider:

Mortar based pavers (rather than sand based). If you have an existing concrete slab or driveway and are considering using a mortar-based paver, this will impact the cost. This may increase or decrease the cost of installing driveway pavers by $2 to $3 per square foot, depending on the conditions. Contact a contractor about mortar based alternatives and see if it is right for you.
Building a concrete base. If you would like a robust driveway (than can carry heavy loads), consider installing a concrete slab underneath driveway pavers. Essentially, the driveway would have a 4-inch to 5-inch concrete slab poured on top of a compacted base. The pavers are then either sand or mortar set on top of the concrete. This alternative would add $4 to $8 to the cost of the project. The reason the additional cost is less than installing a concrete driveway is because it substitutes (in part) the cost of laying a base for the sand-based driveway pavers.

Free Quotes from Pavers Contractors

Find pavers contractors in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Click to Get Quotes

Factors that Influence Brick Driveway Cost in Oakland

When driveway paver contractors come to provide you an estimate, they will consider a number of factors that can increase or decrease the cost of your project. Pricing for your paver driveway project will vary based on the type of paver selected, size of the driveway, and whether you set the pavers in sand or mortar. Here are a few things to keep in mind when you get quotes from paver installation companies:

Your prices may be higher when:

Pavers are set in mortar.
You want a concrete base (rather than stone/sand base).
The existing driveway needs to be demolished.
The property is not conveniently located (travel and delivery costs increase).
You live in a high cost area.
Trees need to be removed.
A sealant is applied.
The site is steep or has rocks that need to be removed.
Brick pavers are selected rather than less expensive concrete pavers.
Dirt has to be hauled offsite.

Your prices may be lower when:

A sand base is installed (rather than a mortar base).
The driveway area is flat and has normal soil conditions.
No demolition of an existing driveway is required.
No soil needs to be hauled from the site.
No trees or rocks require removal.
No sealants or waterproofing is applied.
Your property is conveniently located (lower travel costs).
The property is located in a lower cost area.

Get Paver Driveway Quotes

Find driveway paver contractors in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Free Cost Estimates