Metal Roof Cost in Irvine, California ()
Metal roof cost in Irvine, California ranges from $8,000 to $50,500 depending on roof size and system type. A basic 1,500-sf standing seam roof costs around $15,500 ($12,100 to $18,900). Metal roof costs range from ranges from $8 to $13 per square foot (installed). The term “metal roof” includes roof types such as copper, galvanized steel, aluminum, stainless steel, and zinc. To get a more accurate cost for your metal roof project, request a quote. Please note that if you use our matching service, we may be compensated.
Topics Covered in this Guide: Metal Roof Cost | Metal Roof Cost Factors | Frequently Asked Questions | Related Cost Guides | Find Metal Roofing Companies | Metal Roof Cost in Your Area
Metal Roofing Companies Near You
Find local metal roofing companies in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Free Cost Estimates
How Much Does Metal Roof Cost in Irvine, CA?
Metal roof cost in Irvine, California ranges from $8,000 to $50,500 depending on the size of your roof and the type of metal roof installed.
This guide is intended to provide you an approximate metal roof cost in Irvine, CA. To get a more accurate quote for your specific project, request a free estimate. Our research, although general in nature, does include feedback provided by metal roofing companies and research conducted by the HomeBlue staff.
Metal roof cost:
- Metal roof cost in Irvine, California ranges from $8,000 to $50,500 depending on the size of your roof and the type of metal roof installed. This includes both labor and material. There are various types of metal roof materials including: copper, galvanized steel, aluminum, stainless steel, and zinc.
Metal roof cost (installed) based on the size of your roof:
- Metal roof cost (1,000 sf roof / 10 squares): $8,000 to $12,600.
- Metal roof cost (1,500 sf roof / 15 squares): $12,100 to $18,900.
- Metal roof cost (2,000 sf roof / 20 squares): $16,100 to $25,300.
- Metal roof cost (2,500 sf roof / 25 squares): $20,100 to $31,600.
- Metal roof cost (3,000 sf roof / 30 squares): $24,100 to $37,900.
- Metal roof cost (3,500 sf roof / 35 squares): $28,100 to $44,200.
- metal roof cost (4,000 sf roof / 40 squares): $32,100 to $50,500.
Metal roof cost per square foot:
- Average cost of a metal roof ranges from $8 to $13 per square foot (installed).
Free Quotes from Metal Roof Contractors
Find metal roof contractors in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Click to Get Quotes
Factors that Influence Standing Seam Metal Roof Cost in Irvine
When roofers come to provide you an estimate, they will consider several factors that can increase or decrease the cost of your project. Pricing for your metal roof project will vary based on the type of roofing material used (steel, copper, aluminum) and the size of the roof. Here are a few things to keep in mind when you get quotes from metal roofing contractors:
Your prices may be higher when:
- Your house has multiple stories.
- The roof has a steep pitch.
- The roof is complex, with multiple gables or roof areas.
- You use higher quality metal (copper or zinc).
- You choose a standing seam type roof over a shingle or sheet metal roof.
- The roof underlayment is deteriorated and needs replacement.
- The existing roof needs to be removed before installing the new one.
- A storm recently impacted your region (contractors are booked).
- High end finishes, such as custom colors, are selected.
- An energy efficient reflective coating is used.
Your prices may be lower when:
- You have a single story home.
- The roof has a standard pitch (it is not steep).
- The existing roof does not need to be removed.
- The roof stucture and underlayment are in good condition.
- You select a standard-quality metal like galvanized steel.
- You use metal shingles or sheets rather than a standing seam roof.
- The house has only one roof area.
- The roof is easy to access.
- You schedule the work during the dry season.
Metal Roof Cost Estimates
Find roofers in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Get Cost Estimates
Metal Roof FAQs
Here are a few frequently asked questions related to metal roof:
A metal roofing square refers to the amount of material needed to cover a 10 x 10 foot section of roof, totaling 100-sf. For a 1,500-sf roof, you would need at least 15 squares of material. Roofers often add an extra square or two to account for waste created when cutting the material around vents, chimneys, and roof edges. The definition of a square is consistent across all U.S. cities, including Irvine.
In most areas, a permit is required for metal roof installation or replacement. An experienced contractor will be well-versed in the permitting process and will usually handle obtaining the permit as part of their contract, if necessary, in Irvine.
Although metal roofs are thought to be noisy, modern installation methods and materials significantly reduce sound. When installed with proper insulation and underlayment, metal roofs are typically no louder than other roofing materials when it rains. If you are considering a metal roof in Irvine, talk to your contractor about using sound-dampening options. Without these, your metal roof will be louder when it rains.
In most cases, metal roof replacement in Irvine takes just a couple of days. However, larger or more complex roofs may require three to four days. Regardless of the duration, you can usually stay in your house while the work is being done.
There are many ways to find metal roofing companies in Irvine. You can: 1) Get referrals from neighbors who have recently hired roofers, 2) Use your favorite search engine using search terms like “metal roofing companies,” 3) Check traditional resources such as the yellow pages, 4) Look for advertisements on local TV stations, or 5) Try an online matching service to connect with local metal roof contractors.
Related Cost Guides
We have researched several other closely related projects. If one of these projects better represents the type of project you are undertaking, please check out the appropriate guide:
- Roof replacement cost. Roof Replacement Cost Guide for Irvine
- Window replacement cost. Window Replacement Cost Guide for Irvine
- Gutter installation cost. Gutter Installation Cost Guide for Irvine
Get Metal Roof Quotes
Find roofers in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Free Cost Estimates
Local Metal Roofing Companies Near Irvine, CA
The following are a few contractors in your area. Note that these companies have not been screened or vetted by HomeBlue. Please conduct proper due diligence prior to hiring these or any other company you may select.
Antis Roofing & Waterproofing Since 1989, Antis Roofing & Waterproofing has been serving the roofing needs of Southern California Homeowners Associations, Multi-Family Communities and Corporate Housing Communities. We offer full-service roofing installation, repairs, water testing and maintenance programs. We also install and maintain decking, siding, flashing and more.
EGN Builders Group The EGN team provides sophisticated commercial construction services for projects of all sizes and scopes. We will work with your firm to understand your requirements and construct the building you need to be successful. Our construction professionals can construct a new building, renovate an existing structure, or create the perfect tenant build-out to suit your needs.
Metal Roof Cost Estimates
Find roofers in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Get Cost Estimates
Metal Roof Cost in Your Area
Standing seam metal roof cost varies from area to area. We have developed a number of metal roof cost guides to help you identify the new metal roof cost near you.
- How to Get Metal Roof Price Quotes
- How to Get Matched to Metal Roofing Companies
- Search for Metal Roof Cost in Your City
- Metal Roof Cost Guide (National Averages)
- Metal Roof Cost in Irving, TX