Concrete Slab Cost in Franklin, Tennessee ()
Concrete slab cost in Franklin, Tennessee ranges from $6 to $11 per square foot (reinforced concrete). Concrete pad cost ranges from $5 to $10 per square foot (un-reinforced concrete). These estimates do not include staining or stamping concrete. To get a more accurate cost for your concrete slab project, request a quote. Please note that if you use our matching service, we may be compensated.
Topics Covered in this Guide: Concrete Slab Cost | Concrete Slab Cost Factors | Frequently Asked Questions | Related Cost Guides | Concrete Slab Cost in Your Area
Concrete Slab Contractors Near You
Find local concrete slab contractors in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Free Cost Estimates
How Much Does Concrete Slab Cost in Franklin, TN?
Concrete slab cost in Franklin, Tennessee ranges from $6 to $11 per square foot (reinforced concrete). Concrete pad cost ranges from $5 to $10 per square foot (un-reinforced concrete).
This guide is intended to provide you an approximate concrete slab cost in Franklin, TN. To get a more accurate quote for your specific project, request a free estimate. Our research, although general in nature, does include feedback provided by concrete slab contractors and research conducted by the HomeBlue staff.
Concrete slab cost per square foot (reinforced concrete):
- Concrete slab cost in Franklin, Tennessee ranges from $6 to $11 per square foot (reinforced concrete).
Concrete slab cost (4-6 inch reinforced concrete) based on slab size:
- 3x3 concrete slab cost: $110 to $180 (includes a minimum charge).
- 5x5 concrete slab cost: $200 to $400.
- 10x10 concrete slab cost: $900 to $1,500.
- 20x20 concrete slab cost: $3,500 to $6,000.
- 20x30 concrete slab cost: $5,300 to $9,000.
- 30x30 concrete slab cost: $7,900 to $13,600.
- 30x40 concrete slab cost: $10,500 to $18,100.
- 40x60 concrete slab cost: $21,100 to $36,200.
- Note: Slab thicknesses for residential floors, driveways, and patios typically range from 4 to 6 inches. Commercial floors, industrial uses, and foundations will be thicker and more expensive.
Concrete demolition cost (to remove an existing slab):
- Concrete demolition cost ranges from $1.10 to $1.80 per square foot. If you have an existing concrete slab, the demolition cost will have to be added to the cement slab cost. For instance, when calculating cost of concrete slab, you would add $1.10 (on the low end) and add $1.80 (on the high end).
Free Quotes from Concrete Slab Installers
Find concrete slab installers in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Click to Get Quotes
Factors that Influence Concrete Pad Cost in Franklin
When concrete slab companies come to provide you an estimate, they will consider a number of factors that can increase or decrease the cost of your project. Pricing for your concrete slab project will vary based on the thickness of the slab (these numbers are based on a 4-inch to 6-inch slab), reinforcing materials, inclusion of concrete stamping, and whether coatings are applied. Here are a few things to keep in mind when you get quotes from cement slab contractors:
Your prices may be higher when:
- Rebar and mesh are added (reinforced concrete).
- A 6-inch to 8-inch slab is installed.
- Existing concrete demolition is needed.
- The location of the project requires increased travel time (either distance or traffic).
- Trees or rocks need to be removed.
- Decorative stamping is included.
- Stains or coatings are applied to the concrete.
- The terrain is sloped or wet (added site grading required).
- Lightweight concrete is used (it is more expensive).
- Hauling (to or from the site) is required for dirt, rock or material.
Your prices may be lower when:
- The concrete is unreinforced.
- You want a typical 4-inch to 5-inch slab.
- Normal soil conditions exist (no big rocks or hardpan).
- Standard concrete is used.
- No demolition is required.
- No dirt needs to be removed from or hauled to the property.
- Trees or rocks do not need to be removed.
- No concrete coatings are added.
- No concrete stamping (just standard concrete rakes are used).
- The property is easy to reach.
Concrete Slab Cost Estimates
Find concrete slab companies in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Get Cost Estimates
Concrete Slab FAQs
Here are a few frequently asked questions related to concrete slab:
For residential floors, standard slab thicknesses in Franklin range from four to six inches. Garage, foundation, and basement slabs are on the thicker end of this range. Patios and sidewalks on the thinner end of the range. Slabs carrying heavier loads (such as heavy vehicles, a shed, or a garage) need to be on the thicker end of the range. It is common to reinforce slabs with either rebar or wire mesh. An experienced contractor will help you decide how thick your slab should be.
There are jurisdictions that require a permit for concrete slabs, particularly if they are structural in nature. For instance, if the slab is being used for a shed or pavilion structure it will likely require a permit. So, it is advisable to research whether a permit is required in Franklin. The contractor you are working with should be able to help you determine whether a permit is necessary and, if so, will likely pull the permit as part of their contract.
The average concrete price per yard in Franklin, Tennessee ranges from $117 to $139 depending on the PSI of the concrete.
Concrete takes a month (28-30 days) to fully cure. However, your concrete slab should be walkable within 48 hours. To be safe, you may want to wait a week to apply heavier loads to the slab. Moisture content of the concrete, outside temperatures, ground temperatures, ground conditions, humidity, wind, slab thickness, and the mix design itself all play a role in how quickly concrete cures. Talk with the contractor you hire in Franklin to see whether local conditions merit a longer wait time.
Related Cost Guides
We have researched several other closely related projects. If one of these projects better represents the type of project you are undertaking, please check out the appropriate guide:
- Concrete cost per yard. Concrete Cost Guide for Franklin
- Concrete patio cost. Concrete Patio Cost Guide for Franklin
- Concrete driveway cost. Concrete Driveway Cost Guide for Franklin
- Paver driveway cost. Paver Driveway Cost Guide for Franklin
- Asphalt driveway cost. Asphalt Driveway Cost Guide for Franklin
Get Concrete Slab Quotes
Find concrete slab companies in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Free Cost Estimates
Concrete Slab Cost in Your Area
Concrete pad cost varies from area to area. We have developed a number of concrete slab cost guides to help you identify the calculating cost of concrete slab near you.
- How to Get Concrete Slab Price Quotes
- How to Get Matched to Concrete Slab Contractors
- Search for Concrete Slab Cost in Your City
- Concrete Slab Cost Guide (National Averages)
- Concrete Slab Cost in Frederick, MD