Cost of Kitchen Cabinets in Jefferson City, Missouri ()
The cost of kitchen cabinets in Jefferson City, Missouri ranges from $290 to $630 per linear foot depending on the type of material installed (wood, laminate, metal, etc.). Cabinet installation cost for a small kitchen (10 to 20 linear feet) ranges from $2,900 to $12,600. Solid wood cabinets are at the upper end of these ranges and veneer/laminate cabinets are at the lower end. To get a more accurate cost for your cabinets project, request a quote. Please note that if you use our matching service, we may be compensated.
Topics Covered in this Guide: Cost of Kitchen Cabinets | Cost of Kitchen Cabinets Factors | Frequently Asked Questions | Related Cost Guides | Find Cabinet Installers | Cost of Kitchen Cabinets in Your Area
Cabinet Installers Near You
Find local cabinet installers in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Free Cost Estimates
What Is the Cost of Kitchen Cabinets in Jefferson City, MO?
The cost of kitchen cabinets in Jefferson City, Missouri ranges from $290 to $630 per linear foot depending on the type of material installed (wood, laminate, metal, etc.). The cost of cabinets can also vary significantly depending on whether you install pre-made cabinets or custom-built cabinets. If you are trying to calculate based on the number of “boxes”, this article sets the width of a cabinet box at one foot. Visualize a one-foot-wide cabinet box with a one-foot-wide drawer or single cabinet door. Also, when trying to figure out how many linear feet (or boxes), don’t forget to include cabinets above and below the countertops.
This guide is intended to provide you an approximate cost of kitchen cabinets in Jefferson City, MO. To get a more accurate quote for your specific project, request a free estimate. Our research, although general in nature, does include feedback provided by cabinet installers and research conducted by the HomeBlue staff.
Cost of kitchen cabinets based on the number of cabinets installed:
- Cost of kitchen cabinets (10 linear feet, small kitchen): $2,900 to $6,300.
- Cost of kitchen cabinets (15 linear feet, small kitchen): $4,300 to $9,500.
- Cost of kitchen cabinets (20 linear feet, small kitchen): $5,700 to $12,600.
- Cost of kitchen cabinets (25 linear feet, medium kitchen): $7,200 to $15,800.
- Cost of kitchen cabinets (30 linear feet, medium kitchen): $8,600 to $19,000.
- Cost of kitchen cabinets (35 linear feet, medium kitchen): $10,100 to $22,100.
- Cost of kitchen cabinets (40 linear feet, medium kitchen): $11,500 to $25,300.
- Cost of kitchen cabinets (45 linear feet, large kitchen): $12,900 to $28,400.
- Cost of kitchen cabinets (50 linear feet, large kitchen): $14,400 to $31,600.
- Cost of kitchen cabinets (55 linear feet, large kitchen): $15,800 to $34,800.
- Cost of kitchen cabinets (60 linear feet, large kitchen): $17,200 to $37,900.
- Note: For the purposes of this article, the width of a “box” is one foot (12 inches). The standard widths of a cabinet box are 12 inches, 24 inches, and 36 inches. So, if you have a double cabinet that is 24 inches wide, that would be two linear feet. If you have a cabinet that is 36 inches wide, that would be three linear feet.
Free Quotes from Cabinet Contractors
Find cabinet contractors in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Click to Get Quotes
Factors that Influence Cabinet Installation Cost in Jefferson City
When kitchen cabinet contractors come to your house to provide you an estimate, they will consider a number of factors that can increase or decrease the cost of your project. Pricing for your cabinets project will vary based on your geographic location, the number of cabinets installed, and the type of material used. Here are a few things to keep in mind when you get quotes from cabinet installation contractors:
Your prices may be higher when:
- The cabinets are constructed of solid wood (oak, cherry, maple, etc.) or metal.
- Sustainably harvested woods are used.
- Design includes raised panels or custom finishes.
- The cabinets are custom-made and require custom sizes.
- The kitchen is large (has many cabinets).
- Premium grade cabinet hardware is installed.
- Custom designs are painted on the cabinets.
- Custom drawers, pull out shelves, and storage spaces are installed.
- Plumbing and electrical modifications are required.
- New flooring is required.
- Labor costs in the area are higher than average.
- The location of the project is difficult to access (more travel time).
Your prices may be lower when:
- The cabinets are constructed of plywood, particle board, or laminate.
- The cabinets have flat panels and standard finishes.
- Pre-made, standard size cabinet boxes are used.
- The kitchen is small or medium size (has fewer cabinets).
- Standard grade cabinet hardware is installed.
- A single finish is applied (stain or paint).
- No custom drawers, pull-out shelves, and storage spaces are included.
- No plumbing or electrical modifications are required.
- Flooring does not require repairs.
- Labor costs in the area are below average.
- The location of the project is easy to access (less travel time).
Cabinets Cost Estimates
Find kitchen cabinet contractors in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Get Cost Estimates
Cabinets FAQs
Here are a few frequently asked questions related to cabinets:
Yes, you can often reuse existing kitchen cabinets. They can be disassembled and reused as part of a kitchen remodeling project or moved to another location for use. You can also replace all the doors and hardware on your cabinets. This is known as kitchen cabinet refacing. Review our price guide to see how much kitchen cabinet refacing costs in Jefferson City.
Cabinet refacing cost in Jefferson City ranges from $150 to $210 per door. Refacing can spruce up the look of your kitchen for much less than it costs to replace existing cabinets. It can also be done more quickly than replacing cabinets (which reduces disruption of having your kitchen out of commission). It is also an environmentally friendly option that reduces waste and requires less new material.
Yes, it is cheaper to install kitchen cabinets yourself. However, the primary cost of installing the cabinets is in the cabinet material itself. You can save 20 to 30 percent (give or take) of the overall cost by installing them yourself. If you are a handyman and are up for the challenge, then go for it. There are plenty of guides that will help you through the process. If saving 20 to 30 percent does not sound like it is worth it to you, then hire a cabinet installation pro in Jefferson City.
In general, pre-made cabinets are less expensive than custom cabinets. However, the difference in some cases may not be as much as you think so request some pricing. It may be worth the extra money to get exactly what you want. On the flip side, if you find pre-made cabinets in Jefferson City that you really like and that meet your needs, the reduced cost may be worth it.
Wood is the most popular material used for cabinets. However, it is not as simple as that. Wood products include solid wood (most expensive), plywood (less expensive) and veneers (less expensive). Many laminated or veneer products are applied to various types of particle boards. In general, these are less expensive products than solid wood. Finally, there are metal cabinets. Aluminum or stainless steel are the most popular metals used for cabinets and tend to be a more expensive option. If you need some help deciding which material is best for you, consider talking to a cabinet installer in Jefferson City.
Finding cabinet installers in Jefferson City can be accomplished using one of several methods: 1) Seeking recommendations from neighbors who may have recently installed cabinets, 2) Conducting an online search using keywords such as “cabinet installers”, 3) Searching through a traditional paper directory like the yellow pages, 4) Watching advertisements on local TV stations, 5) Utilizing an online matching service, which offers a convenient way to connect with local professionals.
Related Cost Guides
We have researched several other closely related projects. If one of these projects better represents the type of project you are undertaking, please check out the appropriate guide:
- Want to get your cabinets refaced? Cabinet Refacing Cost Guide for Jefferson City
- Need your kitchen remodeled? Kitchen Remodeling Cost Guide for Jefferson City
- Need your cabinets repainted? Kitchen Cabinet Painting Cost Guide for Jefferson City
- Looking to build a home addition? Home Addition Cost Guide for Jefferson City
Get Cabinets Quotes
Find kitchen cabinet contractors in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Free Cost Estimates
Local Cabinet Installers Near Jefferson City, MO
The following are a few contractors in your area. Note that these companies have not been screened or vetted by HomeBlue. Please conduct proper due diligence prior to hiring these or any other company you may select.
Foley Custom Cabinets Our custom cabinets add value to a home by providing an exact fit. Hand-crafted cabinetry, using only top-quality solid wood and wood veneers. To design and construct high quality yet affordable cabinetry that meets the needs of the customer. Creating a functional and appealing atmosphere reflecting individual personality.
Jake's Creative Woodworks Inc Jake’s Creative Woodworks, Inc. is a high-quality custom woodworking shop. We have a 25,000 square foot facility that is fully equipped with advanced machinery and well trained employees. We do everything from custom designing of the job to the installation. We primarily build kitchen cabinets, bathroom cabinets, laundry room cabinets, entertainment centers, office furniture, mantles, furniture, and countertops, but are more than willing to build anything else you would like. We provide a large selection of woods and finishes. We always make sure to use the best quality of materials and hardware in the projects we take on. As far as countertops go, we work with laminate, solid surface, wood butcher block, quartz, and granite. We build for architects, home builders/contractors, homeowners, designers/decorators, and or anyone else who wants a top of the line product.
Cabinets Cost Estimates
Find kitchen cabinet contractors in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Get Cost Estimates
Find the Cost of Kitchen Cabinets in Your Area
Cabinet installation cost varies from area to area. We have developed a number of cost of kitchen cabinets guides to help you identify the cost of new kitchen cabinets near you.
- How to Get Cabinets Price Quotes
- How to Get Matched to Cabinet Installers
- Search for Cost of Kitchen Cabinets in Your City
- Cost of Kitchen Cabinets Guide (National Averages)
- Cost of Kitchen Cabinets in Jersey City, NJ