Cost of Kitchen Cabinets in Irving, Texas ()
The cost of kitchen cabinets in Irving, Texas ranges from $200 to $450 per linear foot depending on the type of material installed (wood, laminate, metal, etc.). Cabinet installation cost for a small kitchen (10 to 20 linear feet) ranges from $2,000 to $9,000. Solid wood cabinets are at the upper end of these ranges and veneer/laminate cabinets are at the lower end. To get a more accurate cost for your cabinets project, request a quote. Please note that if you use our matching service, we may be compensated.
Topics Covered in this Guide: Cost of Kitchen Cabinets | Cost of Kitchen Cabinets Factors | Frequently Asked Questions | Related Cost Guides | Find Cabinet Installers | Cost of Kitchen Cabinets in Your Area
Cabinet Installers Near You
Find local cabinet installers in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Free Cost Estimates
What Is the Cost of Kitchen Cabinets in Irving, TX?
The cost of kitchen cabinets in Irving, Texas ranges from $200 to $450 per linear foot depending on the type of material installed (wood, laminate, metal, etc.). The cost of cabinets can also vary significantly depending on whether you install pre-made cabinets or custom-built cabinets. If you are trying to calculate based on the number of “boxes”, this article sets the width of a cabinet box at one foot. Visualize a one-foot-wide cabinet box with a one-foot-wide drawer or single cabinet door. Also, when trying to figure out how many linear feet (or boxes), don’t forget to include cabinets above and below the countertops.
This guide is intended to provide you an approximate cost of kitchen cabinets in Irving, TX. To get a more accurate quote for your specific project, request a free estimate. Our research, although general in nature, does include feedback provided by cabinet installers and research conducted by the HomeBlue staff.
Cost of kitchen cabinets based on the number of cabinets installed:
- Cost of kitchen cabinets (10 linear feet, small kitchen): $2,000 to $4,500.
- Cost of kitchen cabinets (15 linear feet, small kitchen): $3,100 to $6,700.
- Cost of kitchen cabinets (20 linear feet, small kitchen): $4,100 to $9,000.
- Cost of kitchen cabinets (25 linear feet, medium kitchen): $5,100 to $11,200.
- Cost of kitchen cabinets (30 linear feet, medium kitchen): $6,100 to $13,400.
- Cost of kitchen cabinets (35 linear feet, medium kitchen): $7,100 to $15,700.
- Cost of kitchen cabinets (40 linear feet, medium kitchen): $8,200 to $17,900.
- Cost of kitchen cabinets (45 linear feet, large kitchen): $9,200 to $20,200.
- Cost of kitchen cabinets (50 linear feet, large kitchen): $10,200 to $22,400.
- Cost of kitchen cabinets (55 linear feet, large kitchen): $11,200 to $24,700.
- Cost of kitchen cabinets (60 linear feet, large kitchen): $12,200 to $26,900.
- Note: For the purposes of this article, the width of a “box” is one foot (12 inches). The standard widths of a cabinet box are 12 inches, 24 inches, and 36 inches. So, if you have a double cabinet that is 24 inches wide, that would be two linear feet. If you have a cabinet that is 36 inches wide, that would be three linear feet.
Free Quotes from Cabinet Contractors
Find cabinet contractors in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Click to Get Quotes
Factors that Influence Cabinet Installation Cost in Irving
When kitchen cabinet contractors come to your house to provide you an estimate, they will consider a number of factors that can increase or decrease the cost of your project. Pricing for your cabinets project will vary based on your geographic location, the number of cabinets installed, and the type of material used. Here are a few things to keep in mind when you get quotes from cabinet installation contractors:
Your prices may be higher when:
- The cabinets are constructed of solid wood (oak, cherry, maple, etc.) or metal.
- Sustainably harvested woods are used.
- Design includes raised panels or custom finishes.
- The cabinets are custom-made and require custom sizes.
- The kitchen is large (has many cabinets).
- Premium grade cabinet hardware is installed.
- Custom designs are painted on the cabinets.
- Custom drawers, pull out shelves, and storage spaces are installed.
- Plumbing and electrical modifications are required.
- New flooring is required.
- Labor costs in the area are higher than average.
- The location of the project is difficult to access (more travel time).
Your prices may be lower when:
- The cabinets are constructed of plywood, particle board, or laminate.
- The cabinets have flat panels and standard finishes.
- Pre-made, standard size cabinet boxes are used.
- The kitchen is small or medium size (has fewer cabinets).
- Standard grade cabinet hardware is installed.
- A single finish is applied (stain or paint).
- No custom drawers, pull-out shelves, and storage spaces are included.
- No plumbing or electrical modifications are required.
- Flooring does not require repairs.
- Labor costs in the area are below average.
- The location of the project is easy to access (less travel time).
Cabinets Cost Estimates
Find kitchen cabinet contractors in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Get Cost Estimates
Cabinets FAQs
Here are a few frequently asked questions related to cabinets:
Yes, you can often reuse existing kitchen cabinets. They can be disassembled and reused as part of a kitchen remodeling project or moved to another location for use. You can also replace all the doors and hardware on your cabinets. This is known as kitchen cabinet refacing. Review our price guide to see how much kitchen cabinet refacing costs in Irving.
Cabinet refacing cost in Irving ranges from $110 to $150 per door. Refacing can spruce up the look of your kitchen for much less than it costs to replace existing cabinets. It can also be done more quickly than replacing cabinets (which reduces disruption of having your kitchen out of commission). It is also an environmentally friendly option that reduces waste and requires less new material.
Yes, it is cheaper to install kitchen cabinets yourself. However, the primary cost of installing the cabinets is in the cabinet material itself. You can save 20 to 30 percent (give or take) of the overall cost by installing them yourself. If you are a handyman and are up for the challenge, then go for it. There are plenty of guides that will help you through the process. If saving 20 to 30 percent does not sound like it is worth it to you, then hire a cabinet installation pro in Irving.
In general, pre-made cabinets are less expensive than custom cabinets. However, the difference in some cases may not be as much as you think so request some pricing. It may be worth the extra money to get exactly what you want. On the flip side, if you find pre-made cabinets in Irving that you really like and that meet your needs, the reduced cost may be worth it.
Wood is the most popular material used for cabinets. However, it is not as simple as that. Wood products include solid wood (most expensive), plywood (less expensive) and veneers (less expensive). Many laminated or veneer products are applied to various types of particle boards. In general, these are less expensive products than solid wood. Finally, there are metal cabinets. Aluminum or stainless steel are the most popular metals used for cabinets and tend to be a more expensive option. If you need some help deciding which material is best for you, consider talking to a cabinet installer in Irving.
Finding cabinet installers in Irving can be accomplished using one of several methods: 1) Seeking recommendations from neighbors who may have recently installed cabinets, 2) Conducting an online search using keywords such as “cabinet installers”, 3) Searching through a traditional paper directory like the yellow pages, 4) Watching advertisements on local TV stations, 5) Utilizing an online matching service, which offers a convenient way to connect with local professionals.
Related Cost Guides
We have researched several other closely related projects. If one of these projects better represents the type of project you are undertaking, please check out the appropriate guide:
- Want to get your cabinets refaced? Cabinet Refacing Cost Guide for Irving
- Need your kitchen remodeled? Kitchen Remodeling Cost Guide for Irving
- Need your cabinets repainted? Kitchen Cabinet Painting Cost Guide for Irving
- Looking to build a home addition? Home Addition Cost Guide for Irving
Get Cabinets Quotes
Find kitchen cabinet contractors in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Free Cost Estimates
Local Cabinet Installers Near Irving, TX
The following are a few contractors in your area. Note that these companies have not been screened or vetted by HomeBlue. Please conduct proper due diligence prior to hiring these or any other company you may select.
Reyes Custom Millwork For 11 years, I worked for various companies in the Metroplex that specialized in custom cabinets, doors and windows by day, and in the evenings, I took on other projects until I decided to venture off on my own and start what we know as Reyes Custom Millwork, LLC. That was the best decision I ever made. I take pride in my humble beginnings and all the struggles I survived with my company to be where I am today. Because of my history with the company I continue to keep an eye on all of our projects personally, whether they are on the millwork or painting side.
G & H CUSTOM CABINETS There is no better way to transform a space while adding plenty of new storage than custom built cabinets. With over 40 years of experience, G & H Custom Cabinets is a premier choice for your next kitchen remodeling project in the Dallas / Fort Worth metropolitan area. Our team can produce high-quality kitchen and bath cabinets that are entirely custom to meet the needs of the homeowner. Since no two pieces are the same, you can have a unique addition to your home that is unlike anyone else. With careful measurements, we can design, precision cut, and install your custom cabinetry correctly every time. Get a quote today and see just how affordable it can be to get custom cabinets.
Cabinets Cost Estimates
Find kitchen cabinet contractors in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Get Cost Estimates
Find the Cost of Kitchen Cabinets in Your Area
Cabinet installation cost varies from area to area. We have developed a number of cost of kitchen cabinets guides to help you identify the cost of new kitchen cabinets near you.
- How to Get Cabinets Price Quotes
- How to Get Matched to Cabinet Installers
- Search for Cost of Kitchen Cabinets in Your City
- Cost of Kitchen Cabinets Guide (National Averages)
- Cost of Kitchen Cabinets in Islip, NY