Cabinet refacing cost in Twin Falls, Idaho ranges from $120 to $170 per door. Refacing kitchen cabinets cost ranges from $130 to $240 per linear foot. To get a more accurate cost for your cabinet refacing project, request a quote.
By HomeBlue Team
August 09, 2022 02:36 PM
Cabinet Refacing Contractors Near You
Find local cabinet refacing contractors in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
How Much Does Cabinet Refacing Cost in Twin Falls, ID?
This guide is intended to provide you an approximate cabinet refacing cost in your area. To get a quote for your specific project, Click Here for a Free Estimate. Our research, which includes feedback provided by cabinet refacing contractors, resulted in the following refacing kitchen cabinets cost in Twin Falls, ID.
Cabinet refacing cost (per door):
Cabinet refacing cost in Twin Falls, Idaho ranges from $120 to $170 per door. Cabinet door materials range from less expensive MDF (medium density fiberboard) to more expensive hard woods. For simplicity, we are sticking to pricing doors only (not drawers). If you have drawers, just count two drawers as one door. For instance, if you have four doors and four drawers, that would be a total of six doors (for pricing purposes). Consult with a contractor to discuss the pros and cons of different material types.
Cabinet refacing cost based on the number of doors:
Refacing kitchen cabinets cost (10 doors): $1,240 to $1,710.
Refacing kitchen cabinets cost (15 doors): $1,860 to $2,570.
Refacing kitchen cabinets cost (20 doors): $2,480 to $3,430.
Refacing kitchen cabinets cost (25 doors): $3,090 to $4,280.
Refacing kitchen cabinets cost (30 doors): $3,710 to $5,140.
Refacing kitchen cabinets cost (35 doors): $4,330 to $6,000.
Refacing kitchen cabinets cost (40 doors): $4,950 to $6,850.
Refacing kitchen cabinets cost (45 doors): $5,570 to $7,710.
Refacing kitchen cabinets cost (50 doors): $6,190 to $8,570.
Cabinet door replacement cost (per linear foot):
Refacing kitchen cabinets cost ranges from $130 to $240 per square foot.
Note: The way to measure cabinets on a “per linear foot basis” is quite easy for cabinet refacing projects. Simply measure the bottom length of each cabinet run from end to end and add the lengths together. Add 1 to 2 feet for each corner where cabinets come together. Don’t forget to measure both the upper cabinets (above the countertops) and the lower cabinets (below the countertops).
Free Quotes from Cabinet Door Installers
Find cabinet door installers in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Factors that Influence Refacing Kitchen Cabinets Cost in Twin Falls
When cabinet refacing services come to provide you an estimate, they will consider several factors that can increase or decrease the cost of your project. Pricing for your cabinet refacing project will vary based on the number of doors and the type of door material used. Here are a few things to keep in mind when you get quotes from cabinet refacing pros:
Your prices may be higher when:
You have an oversized kitchen with many doors and drawers.
You want expensive wood or stainless steel doors installed.
Cabinet shells require painting inside and out.
Hardware is replaced (pulls and hinges).
Premium hardware is installed (pulls and hinges).
The project needs to be completed on a short timeline.
The project is in an expensive geographic location.
The location of the project is difficult to reach (increased travel).
Your prices may be lower when:
You have a standard or small kitchen with fewer doors and drawers.
You want laminated particle/fiberboard or lower cost wood doors installed.
Minimal or no painting is required.
Hardware is reused (pulls and hinges).
You have a flexible timeline (contractor can fit it into their schedule).
The project in a lower cost geographic location.
The location of the project is in an easily accessible area (decreased travel).
Get Cabinet Refacing Quotes
Find cabinet refacing services in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.