Asphalt driveway cost in Baltimore, Maryland ranges from $4 to $7 per square foot (3 to 4-inch thick asphalt). Asphalt driveway cost ranges from $3,700 to $6,400 for a 24-ft x 40-ft driveway (2 car). To get a more accurate cost for your asphalt driveway project, request a quote.
By HomeBlue Team
June 10, 2022 03:26 PM
Paving Companies Near You
Find local paving companies in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
How Much Does an Asphalt Driveway Cost in Baltimore, MD?
This guide is intended to provide you an approximate asphalt driveway cost in your area. To get a quote for your specific project, Click Here for a Free Estimate. Our research, which includes feedback provided by paving companies, resulted in the following blacktop driveway cost in Baltimore, MD.
Asphalt driveway cost:
Asphalt driveway cost in Baltimore, Maryland ranges from $4 to $7 per square foot (3 to 4-inch thick asphalt). These prices include demolition of an existing asphalt driveway. If you would prefer to pave over your existing driveway, asphalt overlay cost may be $2 to $4 less expensive (less asphalt, labor and disposal). Consult with a contractor to discuss the pros and cons of each approach.
Asphalt driveway cost based on the size of your driveway:
Blacktop driveway cost (12 ft x 30 ft, 3 to 4-inches thick): $1,400 to $2,400.
Blacktop driveway cost (12 ft x 40 ft, 3 to 4-inches thick): $1,800 to $3,200.
Blacktop driveway cost (12 ft x 50 ft, 3 to 4-inches thick): $2,300 to $4,000.
Blacktop driveway cost (12 ft x 60 ft, 3 to 4-inches thick): $2,800 to $4,800.
Blacktop driveway cost (24 ft x 30 ft, 3 to 4-inches thick): $2,800 to $4,800.
Blacktop driveway cost (24 ft x 40 ft, 3 to 4-inches thick): $3,700 to $6,400.
Blacktop driveway cost (24 ft x 50 ft, 3 to 4-inches thick): $4,600 to $8,000.
Blacktop driveway cost (24 ft x 60 ft, 3 to 4-inches thick): $8,300 to $15,100.
Note: One car driveways typically vary in width from 9 to 12-feet. Two car driveways typically vary in width from 18 to 24-feet. Above, we used the larger widths in our calculations.
Cost to resurface asphalt driveway:
Cost to resurface asphalt driveway ranges from $2 to $3 per square foot (2-inch overlay). For clarification, an "overlay" is when you apply a layer of asphalt on top of existing asphalt. The lower prices reflect the fact that demolition is not required and that an overlay typically requires less asphalt.
Free Quotes from Asphalt Paving Companies
Find asphalt paving companies in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.
Factors that Influence Blacktop Driveway Cost in Baltimore
When paving contractors come to provide you an estimate, they will consider several factors that can increase or decrease the cost of your project. Pricing for your asphalt driveway project will vary based on the number of inches of asphalt required and whether demolition of an existing driveway is needed. Here are a few things to keep in mind when you get quotes from asphalt contractors:
Your prices may be higher when:
You want 4+ inches of asphalt.
Demolition of a paver or concrete driveway is required.
You are building a new driveway (which requires a compacted base).
Tree or stump removal is required.
Soil in the area of the new driveway is rocky or has hardpan.
The project is in a high cost area.
A permit is required.
The location is difficult to reach (more travel time).
Additional drainage is needed.
Your prices may be lower when:
You only need 2 to 3-inches of asphalt.
Demolition is not required.
Hauling material off-site is not required.
You are overlaying an existing asphalt driveway.
Permits are not required.
The project is in a lower cost area.
The location is easily accessible (easy to get to).
Get Asphalt Driveway Quotes
Find paving contractors in just 3-5 minutes. Tell us what you are looking for and receive free cost estimates without any obligation.